For all types of hydraulically actuated brake and clutch systems requiring non-silicone synthetic fluid. Specially designed to withstand the extreme temperatures of actuated racing brakes (steel or carbon) and clutch systems. Also suitable for conventional brakes with steel discs and for conventional hydraulic clutch actuators. Exceeds DOT 3 and DOT 5.1 standards, except for the viscosity at -40°C / -40°F.
Approvals & specifications
- DOT 3
- DOT 5.1
- DOT 4
Features
- Extreme thermal resistance and stability — MOTUL RBF 600 FACTORY LINE very high dry boiling point (312°C / 594°F) exceeds the requirements of the standards DOT 5.1 non silicone base (260°C mini / 500°F mini) and DOT 4 (230°C mini / 446°F mini), and therefore enables effective braking even in extreme conditions.
Vehicle compatibility: suitable for any vehicle whose handbook specifies one of the standards listed above. Check your handbook before ordering.
Important: brake fluid absorbs moisture from the air, which lowers its boiling point over time. Replace every two years under normal road use, or after each event on track. Never mix with silicone-based DOT 5 fluid.
How to use
Drain interval: always according to manufacturers’ recommendations and to be tuned to your own use. Avoid mixing with lower performance polyglycol-based brake fluids. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent moisture absorption. Aggressive chemical product if in contact with hands, paint or varnish. In case of skin contact, rinse thoroughly with water.
MOTUL part no: 100948