motul-rbf-660-factory-line-0-5l
MOTUL

MOTUL RBF 660 Factory Line - 0.5L

$42.99

Seen this item cheaper somewhere else? Send us the link and we'll do our best to match or beat the price. We'll reply by email.

Product details
  • Type Brake fluid
  • Vendor MOTUL
  • SKU 101666
Description Reviews

For all types of hydraulically actuated brake and clutch systems requiring non-silicone synthetic fluid. Specially designed to withstand the extreme temperature generated by racing carbon and ceramic brakes while allowing minimized air entrance for brake cooling. Also suitable for conventional brakes with steel discs and for conventional hydraulic clutch actuators.

Exceeds DOT 3 and DOT 5.1 standards requirements, except for viscosity at -40°C / -40°F.

Approvals & specifications

  • Color Visual Amber
  • Viscosity at 100°C (212°F) 2.6 mm²/s
  • Viscosity at -40°C (-40°F) 1,698.0 mm²/s
  • Dry boiling point 325.0 °C / 617.0 °F
  • Wet boiling point 205.0 °C / 401.0 °F

Features

  • Extreme thermal resistance and stability — MOTUL RBF 660 FACTORY LINE very high dry boiling point (325°C / 617°F) exceeds the equirements of the standards DOT 5.1 non silicone base (260°C mini / 500°F mini) and DOT 4 (230°C mini / 446°F mini), and therefore enables effective braking even in extreme conditions.
  • Allows better aerodynamic performance by reducing the need for brake cooling air scoops on vehicles.
  • Efficient when rainy — MOTUL RBF 660 FACTORY LINE very high wet boiling point (205°C / 401°F) is superior than the requirements of the standards DOT 5.1 non-silicone base (180°C mini / 356°F mini) and DOT 4 (155°C mini / 311°F mini), and therefore enables to keep efficient braking in wet conditions.

Vehicle compatibility: suitable for any vehicle whose handbook specifies one of the standards listed above. Check your handbook before ordering.

Important: brake fluid absorbs moisture from the air, which lowers its boiling point over time. Replace every two years under normal road use, or after each event on track. Never mix with silicone-based DOT 5 fluid.

How to use

Drain interval: always according to manufacturers’ recommendations and to be tuned to your own use. Avoid mixing with lower performance polyglycol-based brake fluids. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent moisture absorption. Aggressive chemical product if in contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.

MOTUL part no: 101666