All types of hydraulic actuated-brake and clutch systems meeting DOT 4 manufacturers’ recommendations.
Very good thermal resistance and stability:
MOTUL DOT 4 typical dry boiling point (257°C / 494°F) is superior to conventional fluids DOT 4 (230°C / 446°F), and therefore enables effective brake even under extreme conditions.
Security:
MOTUL DOT 4 typical wet boiling point (162°C / 323°F) is superior to conventional fluids DOT 4 (155°C / 311°F), and therefore enables longer use of the product. Indeed DOT 4 brake fluids have the property to absorb humidity in the air, which reduce their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use. Perfectly neutral with seals used in braking systems. Anti-corrosion.
Standards
FMVSS No. 116 DOT 4
SAE J 1704
ISO 4925
KS M2141
JIS K2233
Recommendations
Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.
Do not mix with silicone (DOT 5 silicone base) or mineral base hydraulic fluids (LHM).
Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
Aggressive chemical product if contact with hands, paint or varnish.
In case of skin contact, rinse thoroughly with water.
For safety advice, draining once a year is recommended
